This method is used to initialize the user in applications where you have set calculation by user ID specified by the developer, applications that are part of a cross-platform project.
You can also use this method when calculating by device ID (by default) to pass in the user ID used on your servers so that you can easily find the user on devtodev.
We recommend that you pass this parameter in the initialization configuration (userId property of an instance of theDTDAnalyticsConfiguration class).
Do not pass an empty string ("") to the setUserID method as the user ID. Assigning an empty string is a command to assign a default value to the user ID (it is equal to the current device ID). In applications with calculation by user ID, this can lead to unnecessary registrations.
To set a new value as the user ID, use the setUserId method.
To get the current value of the user ID, use the asynchronous method
getDeviceId(_ completionHandler: @escaping (String) -> Void)
We recommend that you pass this parameter in the initialization configuration (userId property of an instance of theDTDAnalyticsConfiguration class).
Do not pass an empty string ("") to the setUserID method as the user ID. Assigning an empty string is a command to assign a default value to the user ID (it is equal to the current device ID). In applications with calculation by user ID, this can lead to unnecessary registrations.
To set a new value as the user ID, use the setUserId method.
To get the current value of the user ID, use the asynchronous method
(void)deviceIdHandler:( void (^ _Nonnull)(NSString * _Nonnull))completion-Handler;
We recommend that you pass this parameter in the initialization configuration (userId property of an instance of theDTDAnalyticsConfiguration class).
Do not pass an empty string ("") to the setUserID method as the user ID. Assigning an empty string is a command to assign a default value to the user ID (it is equal to the current device ID). In applications with calculation by user ID, this can lead to unnecessary registrations.
To set a new value as the user ID, use the setUserId method.
To get the current value of the user ID, use the asynchronous method
getDeviceId(block: (String) -> Unit)
We recommend that you pass this parameter in the initialization configuration (userId property of an instance of theDTDAnalyticsConfiguration class).
Do not pass an empty string ("") to the SetUserID method as the user ID. Assigning an empty string is a command to assign a default value to the user ID (it is equal to the current device ID). In applications with calculation by user ID, this can lead to unnecessary registrations.
To set a new value as the user ID, use the SetUserId method.
To get the current value of the user ID, use the asynchronous method:
We recommend that you pass this parameter in the initialization configuration (userId property of an instance of theDTDAnalyticsConfiguration class).
Do not pass an empty string ("") to the SetUserID method as the user ID. Assigning an empty string is a command to assign a default value to the user ID (it is equal to the current device ID). In applications with calculation by user ID, this can lead to unnecessary registrations.
To set a new value as the user ID, use the SetUserId method.
To get the current value of the user ID, use the asynchronous method:
We recommend that you pass this parameter in the initialization configuration (userId property in config object).
Do not pass an empty string ("") to the setUserID method as the user ID. Assigning an empty string is a command to assign a default value to the user ID (it is equal to the current device ID). In applications with calculation by user ID, this can lead to unnecessary registrations.
To set a new value as the user ID, use the setUserId method.
To get the current value of the user ID, use the getUserIdmethod
We recommend that you pass this parameter in the initialization configuration (UserId property of an instance of the FDTDAnalyticsConfiguration class).
Do not pass an empty string ("") to the SetUserID method as the user ID. Assigning an empty string is a command to assign a default value to the user ID (it is equal to the current device ID). In applications with calculation by user ID, this can lead to unnecessary registrations.
To set a new value as the user ID, use method:
To get the current value of the user ID, use the asynchronous method:
This method is used in very rare cases. It is applicable in the case when the calculation of users in the project is carried out by the user ID specified by the developer. In this case, the application can change this identifier. For example, calculation in the application is carried out by user emails and in the application, it is possible to change this email to another one. At the time of replacement, you need to call this method, specifying the user's previous email and the one with which it was replaced.
| Arguments | Type | Description |
|---|---|---|
Do not use this method to re-login as a different user! The setUserId method is used for relogging.
This method is used in cross-platform and data synchronized applications. The method is required to update user level data.
To set the current value to the user level, use setCurrentLevel(currentLevel: Int) method:
We recommend that you use the setCurrentLevel method immediately after using the setUserID method or specify the current user level in the initialization configuration (the level property of an instance of the DTDAnalyticsConfiguration).
Do not use the setCurrentLevel method when the user reaches a new level. In this case, you must use the levelUp method.
To get the user-level value stored by the SDK, use getCurrentLevel(completionHandler: @escaping (Int) -> Void) method
To set the current value to the user level, use (void)currentLevel:(NSInteger)currentLevel; method:
We recommend that you use the setCurrentLevel method immediately after using the setUserID method or specify the current user level in the initialization configuration (the level property of an instance of the DTDAnalyticsConfiguration).
Do not use the setCurrentLevel method when the user reaches a new level. In this case, you must use the levelUp method.
To get the user-level value stored by the SDK, use (void)currentLevelHandler:( void (^ _Nonnull)(NSInteger))completionHandler; method
To set the current value to the user level, use method:
We recommend that you use the setCurrentLevel method immediately after using the setUserID method or specify the current user level in the initialization configuration (the level property of an instance of the DTDAnalyticsConfiguration).
Do not use the setCurrentLevel method when the user reaches a new level. In this case, you must use the levelUp method.
To get the user-level value stored by the SDK, use getCurrentLevel(completionHandler: @escaping (Int) -> Void) method
To set the current value to the user level, use method:
We recommend that you use the SetCurrentLevel method immediately after using the SetUserID method or specify the current user level in the initialization configuration (the level property of an instance of the DTDAnalyticsConfiguration).
Do not use the SetCurrentLevel method when the user reaches a new level. In this case, you must use the LevelUp method.
To get the user-level value stored by the SDK, use GetCurrentLevel method:
To set the current value to the user level, use method:
We recommend that you use the SetCurrentLevel method immediately after using the SetUserID method or specify the current user level in the initialization configuration (the level property of an instance of the DTDAnalyticsConfiguration).
Do not use the SetCurrentLevel method when the user reaches a new level. In this case, you must use the LevelUp method.
To get the user-level value stored by the SDK, use GetCurrentLevel method:
To set the current value to the user level, use method:
We recommend that you use the setCurrentLevel method immediately after using the setUserID method or specify the current user level in the initialization configuration (the level property of an instance of the DTDAnalyticsConfiguration).
Do not use the setCurrentLevel method when the user reaches a new level. In this case, you must use the levelUp method.
To get the user-level value stored by the SDK, use getCurrentLevel method.
To set the current value to the user level, use method:
We recommend that you use the SetCurrentLevel method immediately after using the SetUserID method or specify the current user level in the initialization configuration (the level property of an instance of the EDTDAnalyticsConfiguration).
Do not use the SetCurrentLevel method when the user reaches a new level. In this case, you must use the LevelUp method.
To get the user-level value stored by the SDK, use method:
If you have your own methods for detecting cheaters in the application, you can tag such users. Actions taken by these users will not be counted in statistics.
To get the current value of the 'Cheater' flag, use
getCheater(completionHandler: @escaping (Bool) -> Void)
To get the current value of the 'Cheater' flag, use(void)getCheaterHandler:( void (^ _Nonnull)(BOOL))completionHandler;
To get the current value of the 'Cheater' flag, use
getCheater(handler: (Boolean) -> Unit)
To get the current value of the 'Cheater' flag, use
To get the current value of the 'Cheater' flag, use
To get the current value of the 'Cheater' flag, use getCheater method:
To get the current value of the 'cheater' flag, use
Attention! We strongly discourage the storage of personal user data! If you plan to pass this data, be sure to indicate this in the ‘Nutrition label’ when submitting the application to the App Store review.
Attention! We strongly discourage the storage of personal user data! If you plan to pass this data, be sure to indicate this in the ‘Nutrition label’ when submitting the application to the App Store review.
Attention! We strongly discourage the storage of personal user data! If you plan to pass this data, be sure to indicate this in the ‘Nutrition label’ when submitting the application to the App Store review.
Attention! We strongly discourage the storage of personal user data! If you plan to pass this data, be sure to indicate this in the ‘Nutrition label’ when submitting the application to the App Store review.
Example:
Each devtodev project can have up to 30 custom user properties. User custom property values can be a number, a string, or a boolean value.
This is how you can set properties on the current user profile:
It is important to remember that the key for custom user properties has a length limit. If the limit is exceeded (from 1 to 64 characters), the key will be truncated to the maximum allowed length
To get the current value stored in the user profile on the SDK, you need to use the method:
getValue(key: String, _completionHandler: @escaping (Any) -> Void)
When using the getValue method, note that the Anyreturn type will need to be cast to the data type you want.
This is how you can set properties on the current user profile:
It is important to remember that the key for custom user properties has a length limit. If the limit is exceeded (from 1 to 64 characters), the key will be truncated to the maximum allowed length
To get the current value stored in the user profile on the SDK, you need to use the method:
(void)getValueWithKey:(NSString * _Nonnull)key :(void (^ _Nonnull)(id _Nullable))completionHandler;
When using the getValue method, note that the Anyreturn type will need to be cast to the data type you want.
This is how you can set properties on the current user profile:
It is important to remember that the key for custom user properties has a length limit. If the limit is exceeded (from 1 to 64 characters), the key will be truncated to the maximum allowed length
To get the current value stored in the user profile on the SDK, you need to use the method:
getValue(key: String, handler: (Any?) -> Unit)
When using the getValue method, note that the Anyreturn type will need to be cast to the data type you want.
This is how you can set properties on the current user profile:
It is important to remember that the key for custom user properties has a length limit. If the limit is exceeded (from 1 to 64 characters), the key will be truncated to the maximum allowed length
To get the current value stored in the user profile on the SDK, you need to use the method:
When using the Get method, note that the object return type will need to be cast to the data type you want.
This is how you can set properties on the current user profile:
It is important to remember that the key for custom user properties has a length limit. If the limit is exceeded (from 1 to 64 characters), the key will be truncated to the maximum allowed length
To get the current value stored in the user profile on the SDK, you need to use the method:
When using the Get method, note that the object return type will need to be cast to the data type you want.
This is how you can set properties on the current user profile:
It is important to remember that the key for custom user properties has a length limit. If the limit is exceeded (from 1 to 64 characters), the key will be truncated to the maximum allowed length
To get the current value stored in the user profile on the SDK, you need to use the method:
This is how you can set properties on the current user profile:
It is important to remember that the key for custom user properties has a length limit. If the limit is exceeded (from 1 to 64 characters), the key will be truncated to the maximum allowed length
To get the current value stored in the user profile on the SDK, you need to use methods:
It removes a property or a list of properties and their values from the current user profile.
To remove all properties from the user card, use:
Keep in mind that the cheater mark is not cleared from the user card; you can only uncheck the mark manually using the setCheater method.
Keep in mind that the cheater mark is not cleared from the user card; you can only uncheck the mark manually using the setCheater method.
Keep in mind that the cheater mark is not cleared from the user card; you can only uncheck the mark manually using the setCheater method.
Keep in mind that the cheater mark is not cleared from the user card; you can only uncheck the mark manually using the SetCheater method.
Keep in mind that the cheater mark is not cleared from the user card; you can only uncheck the mark manually using the SetCheater method.
Keep in mind that the cheater mark is not cleared from the user card; you can only uncheck the mark manually using the setCheater method.
Keep in mind that the cheater mark is not cleared from the user card; you can only uncheck the mark manually using the SetCheater method.
| Arguments | Type | Description |
|---|---|---|
| Arguments | Type | Description |
|---|---|---|
| Arguments | Type | Description |
|---|---|---|
| Arguments | Type | Description |
|---|---|---|
| Arguments | Type | Description |
|---|---|---|
| Arguments | Type | Description |
|---|---|---|
| Property | Setter | Getter |
|---|---|---|
| Arguments | Type | Description |
|---|---|---|
| Arguments | Type | Description |
|---|---|---|
| Arguments | Type | Description |
|---|---|---|
| Arguments | Type | Description |
|---|---|---|
| Arguments | Type | Description |
|---|---|---|
| Arguments | Type | Description |
|---|---|---|
| Arguments | Type | Description |
|---|---|---|
| Arguments | Type | Description |
|---|---|---|
| Arguments | Type | Description |
|---|---|---|
| Arguments | Type | Description |
|---|---|---|
userId
FString
User ID.
onResult
FAnalyticsDynamicGetterStringDelegate
FDTDGetterStringDelegate
Callback
level
int32
Current level.
onResult
FAnalyticsDynamicGetterIntDelegate
FDTDGetterIntDelegate
Callback
cheater
bool
Cheater flag
onResult
FUserCardDynamicGetterBoolDelegate
FDTDGetterBoolDelegate
Callback
Property
Getter
Setter
Name
setName(name: String)
getName(completionHandler: @escaping (String?) -> Void)
setEmail(email: String)
getEmail(completionHandler: @escaping (String?) -> Void)
Phone
setPhone(phone: String)
getPhone(completionHandler: @escaping (String?) -> Void)
Photo
setPhoto(photo: String)
getPhoto(completionHandler: @escaping (String?) -> Void)
Gender
setGender(gender: DTDGender)
getGender(completionHandler: @escaping (DTDGender) -> Void)
Age
setAge(age: Int)
getAge(completionHandler: @escaping (Int) -> Void
Property
Setter
Getter
Age
[DTDUserCard setAge:(NSInteger)];
[DTDUserCard getAgeHandler:^(NSInteger age) { }]
[DTDUserCard setEmail:(NSString * _Nonnull)];
[DTDUserCard getEmailHandler:^(NSString * email) { }];
Gender
[DTDUserCard setGender:(enum Gender)];
[DTDUserCard getGenderHandler:^(enum Gender gender) { }];
Name
[DTDUserCard setName:(NSString * _Nonnull)];
[DTDUserCard getNameHandler:^(NSString * name) { }];
Phone
[DTDUserCard setPhone:(NSString * _Nonnull)];
[DTDUserCard getPhoneHandler:^(NSString * phone) { }];
Photo
[DTDUserCard setPhoto:(NSString * _Nonnull)];
[DTDUserCard getPhotoHandler:^(NSString * photo) { }];
Property
Getter
Setter
Name
setName(name: String)
getName(handler: (String) -> Unit)
setEmail(email: String)
getEmail(handler: (String) -> Unit)
Phone
setPhone(phone: String)
getPhone(handler: (String) -> Unit)
Photo
setPhoto(photo: String)
getPhoto(handler: (String) -> Unit)
Gender
setGender(gender: DTDGender)
getGender(handler: (DTDGender) -> Void)
Age
setAge(age: Int)
getAge(handler: (String) -> Unit)
Property
Getter
Setter
Name
SetName(name: string)
Task<string> GetName();
SetEmail(email: string)
Task<string> GetEmail()
Phone
SetPhone(phone: string)
Task<string> GetPhone()
Photo
SetPhoto(photo: string)
Task<string> GetPhoto()
Gender
SetGender(gender: DTDGender)
Task<DTDGender> GetGender()
Age
SetAge(age: long)
Task<long> GetAge()
Property
Getter
Setter
Name
SetName(name: string)
GetName(Action<string> onGetName)
SetEmail(email: string)
GetEmail(Action<string> onGetEmail)
Phone
SetPhone(phone: string)
GetPhone(Action<string> onGetPhone)
Photo
SetPhoto(photo: string)
GetPhoto(Action<string> onGetPhoto)
Gender
SetGender(gender: DTDGender)
GetGender(Action<DTDGender> onGetGender)
Age
SetAge(age: long)
GetAge(Action<string> onGetAge)
Property
Getter
Setter
Type
Name
getName()
setName("John Doe")
String
getEmail()
setEmail("email@me.com")
String
Phone
getPhone()
setPhone("+15555555555")
String
Photo
getPhoto()
setPhoto("https://domain.com/photo.jpg")
String
Gender
getGender()
setGender(gender)
Age
getAge()
setAge(age)
Int
Name
SetName(name: FString)
GetName(delegate: FUserCardDynamicGetterStringDelegate)
GetName(delegate: FDTDGetterStringDelegate)
Email
SetEmail(email: FString)
GetEmail(delegate: FUserCardDynamicGetterStringDelegate)
GetEmail(delegate: FDTDGetterStringDelegate)
Phone
SetPhone(phone: FString)
GetPhone(delegate: FUserCardDynamicGetterStringDelegate)
GetPhone(delegate: FDTDGetterStringDelegate)
Photo
SetPhoto(photo: FString)
GetPhoto(delegate: FUserCardDynamicGetterStringDelegate)
GetPhoto(delegate: FDTDGetterStringDelegate)
Gender
SetGender(gender: EDTDGender)
GetGender(delegate: FUserCardDynamicGetterGenderDelegate)
GetGender(delegate: FDTDGetterGenderDelegate)
Age
SetAge(age: int64)
GetAge(delegate: FUserCardDynamicGetterLongDelegate)
GetAge(delegate: FDTDGetterLongDelegate)
key
FString
Parameter key.
value
bool
Parameter value.
key
FString
Parameter key.
value
float
Parameter value.
key
FString
Parameter key.
value
int64
Parameter value.
key
FString
Parameter key.
value
FString
Parameter value.
key
FString
Parameter key.
onResult
FUserCardDynamicGetterOptionalBoolDelegate
FDTDGetterOptionalBoolWithKeyDelegate
Callback.
key
FString
Parameter key.
onResult
FUserCardDynamicGetterOptionalFloatDelegate
FDTDGetterOptionalFloatWithKeyDelegate
Callback.
key
FString
Parameter key.
onResult
FUserCardDynamicGetterOptionalLongDelegate
FDTDGetterOptionalLongWithKeyDelegate
Callback.
key
FString
Parameter key.
onResult
FUserCardDynamicGetterOptionalStringDelegate
FDTDGetterOptionalStringWithKeyDelegate
Callback.
key
FString
Parameter key.
keys
TArray<FString>
Parameter keys.
fromUserId
FString
From user ID
toUserId
FString
To user ID
Blueprint
