1 of 1

Anticheat methods

Recommended sequence of actions when working with transactions

Get response about a completed transaction from the payment system.
Either send data about the received transaction for verification by calling devtodev anti-cheat methods or use your own tools for transaction verification.
If the transaction has successfully passed verification, perform the Payment event.
If the transaction hasn’t passed verification, do not perform the Payment event and mark the user as a cheater.

Payment Validation

The devtodev service allows you to validate transactions to prevent fraud from influencing your statistics. For this, you need to integrate DTDAntiCheat module.

We strongly discourage you from using verification results for deciding on allowing or denying users to receive their purchases! Employ this method exclusively for preventing fraud transaction data from being sent to devtodev!

To validate the transaction you can use the verifyPayment(completionHandler: @escaping (DTDVerifyResponse) -> Void) method immediately during the transaction processing, e.g.:

extension Purchases: SKPaymentTransactionObserver {
    func paymentQueue(_ queue: SKPaymentQueue, updatedTransactions transactions: [SKPaymentTransaction]) {
        for transaction in transactions {
            switch transaction.transactionState {
                case .purchased:
                    DTDAntiCheat.verifyPayment { response in
                            switch response.receiptStatus {
                                case .receiptInternalError: 
                                  // your code
                                  break
                                case .receiptValid:
                                  // your code
                                  break
                                case .receiptSandbox:
                                  // your code
                                  break
                                case .receiptServerError:
                                  // your code
                                  break
                                case .receiptNotValid: 
                                  // your code
                                  break
                                @unknown default: break
                            }
                            SKPaymentQueue.default().finishTransaction(transaction)
                        }

                case .restored:
                    SKPaymentQueue.default().finishTransaction(transaction)

                case .failed:
                    SKPaymentQueue.default().finishTransaction(transaction)

                default:
                    break
            }
        }
    }
}

`DTDVerifyResponse`

The DTDVerifyResponse object returned while validating the transaction has two properties:

`DTDReceiptStatus`

The enum type returned as a result of validation can receive the following values:

We recommend calling the Real Currency Payment method in all cases except when you receive receiptNotValid or receiptSandbox as a result of the validation.

To validate the transaction you can use the (void)verifyPaymentCompletion:( void (^ _Nonnull)(DTDVerifyResponse * _Nonnull))completionHandler; method immediately during the transaction processing, e.g.:

- (void)paymentQueue:(SKPaymentQueue *)queue updatedTransactions:(NSArray *)transactions{
    for(SKPaymentTransaction *transaction in transactions) {
        switch(transaction.transactionState){
            case SKPaymentTransactionStatePurchasing: {
                // Your code ...
                break;
            }

            case SKPaymentTransactionStatePurchased: {
                // Your code ...
                [DTDAntiCheat verifyPaymentCompletion:^(DTDVerifyResponse * _Nonnull response) {
                    switch ([response receiptStatus]) {
                        case ReceiptStatusReceiptInternalError: {

                            break;
                        }
                        case ReceiptStatusReceiptValid: {

                            break;
                        }
                        case ReceiptStatusReceiptSandbox: {

                            break;
                        }
                        case ReceiptStatusReceiptServerError: {

                            break;
                        }
                        case ReceiptStatusReceiptNotValid: {

                            break;
                        }
                    }
                }];
                break;
            }

            case SKPaymentTransactionStateRestored: {
                // Your code ...
                break;
            }

            case SKPaymentTransactionStateFailed: {
                // Your code ...
                break;
            }

            case SKPaymentTransactionStateDeferred: {
                // Your code ...
                break;
            }
        }
    }
}

`DTDVerifyResponse`

The DTDVerifyResponse object returned while validating the transaction has two properties:

`DTDReceiptStatus`

The enum type returned as a result of validation can receive the following values:

We recommend calling the Real Currency Payment method in all cases except when you receive receiptNotValid or receiptSandbox as a result of the validation.

When GooglePlay sends the transaction back to your onActivityResult, validate it by calling the following method: verifyPayment(receipt: String, signature: String, publicKey: String, completionHandler:(DTDVerifyResponse) -> Unit) immediately during the transaction processing, e.g.:

DTDAntiCheat.verifyPayment(
    receipt = "receipt", 
    signature = "signature", 
    publickKey = "publickKey"
) { dtdVerifyResponse ->
    val verificationResult = dtdVerifyResponse.verificationResult
    /* your code here */
    when (dtdVerifyResponse.receiptStatus) {
        DTDReceiptStatus.ReceiptValid -> { /* your code here */ }
        DTDReceiptStatus.ReceiptNotValid -> { /* your code here */ }
        DTDReceiptStatus.ReceiptServerError -> { /* your code here */ }
        DTDReceiptStatus.ReceiptInternalError -> { /* your code here */ }
    }
}

`DTDVerifyResponse`

The DTDVerifyResponse object returned while validating the transaction has two properties:

`DTDReceiptStatus`

The enum type returned as a result of validation can receive the following values:

We recommend calling the Real Currency Payment method in all cases except when you receive receiptNotValid as a result of the validation.

DTDAntiCheat.INSTANCE.verifyPayment("receipt", "signature", "publickKey",
                dtdVerifyResponse -> {
                // your code
                    switch (dtdVerifyResponse.getReceiptStatus()) {
                        case ReceiptValid:
                            // your code
                            break;
                        case ReceiptNotValid:
                            // your code
                            break;
                        case ReceiptInternalError:
                            // your code
                            break;
                        case ReceiptServerError:
                            // your code
                            break;
                    }
                    return null;
                });

`DTDVerifyResponse`

The DTDVerifyResponse object returned while validating the transaction has two properties:

`DTDReceiptStatus`

The enum type returned as a result of validation can receive the following values:

We recommend calling the Real Currency Payment method in all cases except when you receive receiptNotValid as a result of the validation.

devtodev sends a request for transaction verification to the payment platform and then forwards the answer to the app. To validate the transaction you can use theTask<DTDReceiptStatus> VerifyPayment(string: receipt) method. As an argument pass the PurchaseResults.ReceiptXml property. More information about it here.

Example of verification:

var result = await DTDAntiCheat.VerifyPayment("receipt");
switch (result)
{
    case DTDReceiptStatus.Valid:
        break;
    case DTDReceiptStatus.Invalid:
        break;
    case DTDReceiptStatus.ServerError:
        break;
    case DTDReceiptStatus.InternalError:
        break;
    default:
        throw new ArgumentOutOfRangeException();
}

`DTDVerifyResponse`

The DTDVerifyResponse object returned while validating the transaction has two properties:

`DTDReceiptStatus`

The enum type returned as a result of validation can receive the following values:

We recommend calling the Real Currency Payment method in all cases except when you receive Invalid as a result of the validation.

Google Play

If you use Unity IAP for payment validation, call the following method: void VerifyPayment(string publicKey, string receipt, Action completionHandler)

Example:

public PurchaseProcessingResult ProcessPurchase (PurchaseEventArgs e)
{
    DTDAntiCheat.VerifyPayment(yourPublicKey, e.purchasedProduct.receipt, result =>
    {
        if (result.ReceiptStatus == DTDReceiptVerificationStatus.ReceiptValid ||
            result.ReceiptStatus == DTDReceiptVerificationStatus.ReceiptInternalError || 
            result.ReceiptStatus == DTDReceiptVerificationStatus.ReceiptServerError)
        {
            // Code for valid result.
        }
        else
        {
            // Code for invalid result.
        }
    });
}

To validate data received from Google play, use void VerifyPayment(string publicKey, string receipt, string signature,Action<DTDVerifyResponse> completionHandler) when handling the transaction.

public void MyNativeCallback (string publicKey, string receipt, string signature)
{
    DTDAntiCheat.VerifyPayment(publicKey, receipt, signature, result =>
    {
        if (result.ReceiptStatus == DTDReceiptVerificationStatus.ReceiptValid ||
            result.ReceiptStatus == DTDReceiptVerificationStatus.ReceiptInternalError || 
            result.ReceiptStatus == DTDReceiptVerificationStatus.ReceiptServerError)
        {
            // Code for valid result.
        }
        else
        {
            // Code for invalid result.
        }
    });
}

Here's how to find your app's public key for licensing (for Google Play platform only, for other platforms the publicKey is not used):

Go to the Google Play Console and sign in. Make sure that you sign in to the account from which the app you are licensing is published (or will be published).
In the app details page, locate the Services & APIs link and click it.
In the Services & APIs page, locate the Licensing & In-App Billing section. Your public key for licensing is given in the Your License Key For This Application field.

App Store

If you use Unity IAP for payment validation, call the following method: void VerifyPayment(string receipt, Action completionHandler)

public PurchaseProcessingResult ProcessPurchase (PurchaseEventArgs e)
{
    DTDAntiCheat.VerifyPayment(e.purchasedProduct.receipt, result =>
    {
        if (result.ReceiptStatus == DTDReceiptVerificationStatus.ReceiptValid ||
            result.ReceiptStatus == DTDReceiptVerificationStatus.ReceiptInternalError || 
            result.ReceiptStatus == DTDReceiptVerificationStatus.ReceiptServerError)
        {
            // Code for valid result.
        }
        else
        {
            // Code for invalid result.
        }
    });
}

Windows Store (UWP)

If you use Unity IAP for payment validation, call the following method: void VerifyPayment(string receipt, Action completionHandler)

public PurchaseProcessingResult ProcessPurchase (PurchaseEventArgs e)
{
    DTDAntiCheat.VerifyPayment(e.purchasedProduct.receipt, result =>
    {
        if (result.ReceiptStatus == DTDReceiptVerificationStatus.ReceiptValid ||
            result.ReceiptStatus == DTDReceiptVerificationStatus.ReceiptInternalError || 
            result.ReceiptStatus == DTDReceiptVerificationStatus.ReceiptServerError)
        {
            // Code for valid result.
        }
        else
        {
            // Code for invalid result.
        }
    });
}

N.B. You can pass a native XML recipe to the receipt argument.

`DTDVerifyResponse`

The DTDVerifyResponse object returned while validating the transaction has two properties:

`DTDReceiptStatus`

The enum type returned as a result of validation can receive the following values:

We recommend calling the Real Currency Payment method in all cases except when you receive receiptNotValid or receiptSandbox as a result of the validation.

Anticheat methods

Recommended sequence of actions when working with transactions

Get response about a completed transaction from the payment system.
Either send data about the received transaction for verification by calling devtodev anti-cheat methods or use your own tools for transaction verification.
If the transaction has successfully passed verification, perform the Payment event.
If the transaction hasn’t passed verification, do not perform the Payment event and mark the user as a cheater.

Payment Validation

The devtodev service allows you to validate transactions to prevent fraud from influencing your statistics. For this, you need to integrate DTDAntiCheat module.

To validate the transaction you can use the verifyPayment(completionHandler: @escaping (DTDVerifyResponse) -> Void) method immediately during the transaction processing, e.g.:

extension Purchases: SKPaymentTransactionObserver {
    func paymentQueue(_ queue: SKPaymentQueue, updatedTransactions transactions: [SKPaymentTransaction]) {
        for transaction in transactions {
            switch transaction.transactionState {
                case .purchased:
                    DTDAntiCheat.verifyPayment { response in
                            switch response.receiptStatus {
                                case .receiptInternalError: 
                                  // your code
                                  break
                                case .receiptValid:
                                  // your code
                                  break
                                case .receiptSandbox:
                                  // your code
                                  break
                                case .receiptServerError:
                                  // your code
                                  break
                                case .receiptNotValid: 
                                  // your code
                                  break
                                @unknown default: break
                            }
                            SKPaymentQueue.default().finishTransaction(transaction)
                        }

                case .restored:
                    SKPaymentQueue.default().finishTransaction(transaction)

                case .failed:
                    SKPaymentQueue.default().finishTransaction(transaction)

                default:
                    break
            }
        }
    }
}

`DTDVerifyResponse`

The DTDVerifyResponse object returned while validating the transaction has two properties:

`DTDReceiptStatus`

The enum type returned as a result of validation can receive the following values:

We recommend calling the Real Currency Payment method in all cases except when you receive receiptNotValid or receiptSandbox as a result of the validation.

- (void)paymentQueue:(SKPaymentQueue *)queue updatedTransactions:(NSArray *)transactions{
    for(SKPaymentTransaction *transaction in transactions) {
        switch(transaction.transactionState){
            case SKPaymentTransactionStatePurchasing: {
                // Your code ...
                break;
            }

            case SKPaymentTransactionStatePurchased: {
                // Your code ...
                [DTDAntiCheat verifyPaymentCompletion:^(DTDVerifyResponse * _Nonnull response) {
                    switch ([response receiptStatus]) {
                        case ReceiptStatusReceiptInternalError: {

                            break;
                        }
                        case ReceiptStatusReceiptValid: {

                            break;
                        }
                        case ReceiptStatusReceiptSandbox: {

                            break;
                        }
                        case ReceiptStatusReceiptServerError: {

                            break;
                        }
                        case ReceiptStatusReceiptNotValid: {

                            break;
                        }
                    }
                }];
                break;
            }

            case SKPaymentTransactionStateRestored: {
                // Your code ...
                break;
            }

            case SKPaymentTransactionStateFailed: {
                // Your code ...
                break;
            }

            case SKPaymentTransactionStateDeferred: {
                // Your code ...
                break;
            }
        }
    }
}

`DTDVerifyResponse`

The DTDVerifyResponse object returned while validating the transaction has two properties:

`DTDReceiptStatus`

The enum type returned as a result of validation can receive the following values:

We recommend calling the Real Currency Payment method in all cases except when you receive receiptNotValid or receiptSandbox as a result of the validation.

DTDAntiCheat.verifyPayment(
    receipt = "receipt", 
    signature = "signature", 
    publickKey = "publickKey"
) { dtdVerifyResponse ->
    val verificationResult = dtdVerifyResponse.verificationResult
    /* your code here */
    when (dtdVerifyResponse.receiptStatus) {
        DTDReceiptStatus.ReceiptValid -> { /* your code here */ }
        DTDReceiptStatus.ReceiptNotValid -> { /* your code here */ }
        DTDReceiptStatus.ReceiptServerError -> { /* your code here */ }
        DTDReceiptStatus.ReceiptInternalError -> { /* your code here */ }
    }
}

`DTDVerifyResponse`

The DTDVerifyResponse object returned while validating the transaction has two properties:

`DTDReceiptStatus`

The enum type returned as a result of validation can receive the following values:

We recommend calling the Real Currency Payment method in all cases except when you receive receiptNotValid as a result of the validation.

DTDAntiCheat.INSTANCE.verifyPayment("receipt", "signature", "publickKey",
                dtdVerifyResponse -> {
                // your code
                    switch (dtdVerifyResponse.getReceiptStatus()) {
                        case ReceiptValid:
                            // your code
                            break;
                        case ReceiptNotValid:
                            // your code
                            break;
                        case ReceiptInternalError:
                            // your code
                            break;
                        case ReceiptServerError:
                            // your code
                            break;
                    }
                    return null;
                });

`DTDVerifyResponse`

The DTDVerifyResponse object returned while validating the transaction has two properties:

`DTDReceiptStatus`

The enum type returned as a result of validation can receive the following values:

We recommend calling the Real Currency Payment method in all cases except when you receive receiptNotValid as a result of the validation.

Example of verification:

var result = await DTDAntiCheat.VerifyPayment("receipt");
switch (result)
{
    case DTDReceiptStatus.Valid:
        break;
    case DTDReceiptStatus.Invalid:
        break;
    case DTDReceiptStatus.ServerError:
        break;
    case DTDReceiptStatus.InternalError:
        break;
    default:
        throw new ArgumentOutOfRangeException();
}

`DTDVerifyResponse`

The DTDVerifyResponse object returned while validating the transaction has two properties:

`DTDReceiptStatus`

The enum type returned as a result of validation can receive the following values:

We recommend calling the Real Currency Payment method in all cases except when you receive Invalid as a result of the validation.

Google Play

If you use Unity IAP for payment validation, call the following method: void VerifyPayment(string publicKey, string receipt, Action completionHandler)

Example:

public PurchaseProcessingResult ProcessPurchase (PurchaseEventArgs e)
{
    DTDAntiCheat.VerifyPayment(yourPublicKey, e.purchasedProduct.receipt, result =>
    {
        if (result.ReceiptStatus == DTDReceiptVerificationStatus.ReceiptValid ||
            result.ReceiptStatus == DTDReceiptVerificationStatus.ReceiptInternalError || 
            result.ReceiptStatus == DTDReceiptVerificationStatus.ReceiptServerError)
        {
            // Code for valid result.
        }
        else
        {
            // Code for invalid result.
        }
    });
}

To validate data received from Google play, use void VerifyPayment(string publicKey, string receipt, string signature,Action<DTDVerifyResponse> completionHandler) when handling the transaction.

public void MyNativeCallback (string publicKey, string receipt, string signature)
{
    DTDAntiCheat.VerifyPayment(publicKey, receipt, signature, result =>
    {
        if (result.ReceiptStatus == DTDReceiptVerificationStatus.ReceiptValid ||
            result.ReceiptStatus == DTDReceiptVerificationStatus.ReceiptInternalError || 
            result.ReceiptStatus == DTDReceiptVerificationStatus.ReceiptServerError)
        {
            // Code for valid result.
        }
        else
        {
            // Code for invalid result.
        }
    });
}

Here's how to find your app's public key for licensing (for Google Play platform only, for other platforms the publicKey is not used):

Go to the Google Play Console and sign in. Make sure that you sign in to the account from which the app you are licensing is published (or will be published).
In the app details page, locate the Services & APIs link and click it.
In the Services & APIs page, locate the Licensing & In-App Billing section. Your public key for licensing is given in the Your License Key For This Application field.

App Store

If you use Unity IAP for payment validation, call the following method: void VerifyPayment(string receipt, Action completionHandler)

public PurchaseProcessingResult ProcessPurchase (PurchaseEventArgs e)
{
    DTDAntiCheat.VerifyPayment(e.purchasedProduct.receipt, result =>
    {
        if (result.ReceiptStatus == DTDReceiptVerificationStatus.ReceiptValid ||
            result.ReceiptStatus == DTDReceiptVerificationStatus.ReceiptInternalError || 
            result.ReceiptStatus == DTDReceiptVerificationStatus.ReceiptServerError)
        {
            // Code for valid result.
        }
        else
        {
            // Code for invalid result.
        }
    });
}

Windows Store (UWP)

If you use Unity IAP for payment validation, call the following method: void VerifyPayment(string receipt, Action completionHandler)

public PurchaseProcessingResult ProcessPurchase (PurchaseEventArgs e)
{
    DTDAntiCheat.VerifyPayment(e.purchasedProduct.receipt, result =>
    {
        if (result.ReceiptStatus == DTDReceiptVerificationStatus.ReceiptValid ||
            result.ReceiptStatus == DTDReceiptVerificationStatus.ReceiptInternalError || 
            result.ReceiptStatus == DTDReceiptVerificationStatus.ReceiptServerError)
        {
            // Code for valid result.
        }
        else
        {
            // Code for invalid result.
        }
    });
}

N.B. You can pass a native XML recipe to the receipt argument.

`DTDVerifyResponse`

The DTDVerifyResponse object returned while validating the transaction has two properties:

`DTDReceiptStatus`

The enum type returned as a result of validation can receive the following values:

We recommend calling the Real Currency Payment method in all cases except when you receive receiptNotValid or receiptSandbox as a result of the validation.